Sunday, May 13, 2012

Iron on Vinyl Tutorial for Your Convenience

Recently, I discovered how iron on vinyl works and I cannot wait to share this to everyone. So, to those of you who are interested, here are the easy steps to create this wonderful project using iron on vinyl.

Before anything else, you need to prepare all of your materials. Cut the fabric pattern that you wanted to be covered with vinyl. Put the right side in the fabric facing up then ensure the corners are free from excess thread together with fluff. Lay it down neatly to smooth wrinkles and folds. After that, prepare your vinyl for the next step. Cut the vinyl according to the size of the fabric. Receive the vinyl set up through removing it from the protecting paper. We will be using the protective paper so you might as well save it for later. Just one idea to produce the tearing off less complicated is always to chafe the corners in the vinyl within your thumb and fingers.

Once the vinyl has been removed from the protective paper, flatten out the vinyl onto the fabric. Once again make certain the sticky side from the vinyl is facing the material. Secure the placement to ensure there are no wrinkles and folds on any of the fabric and vinyl. Preheat your iron according to the guidelines indicated on the vinyl. For the following step, get your shielding paper out there. Ironing directly on the vinyl will melt it, which will not only waste it but will also destroy the project. Given that scenario, you should organize the fabric at the end after which is the vinyl. When ironing, the protective paper must be on top to protect the vinyl from melting under the iron heat.

When ironing the vinyl on the fabric, follow the directions on heating the vinyl. An ideal amount of heat as well as pressure is reliant within the variety of the vinyl, and therefore, you must read thoroughly. Repeat the same manner of ironing on the reverse side of the fabric. At this point, around, you may forget about needing the protecting paper thinking that you could right away iron the fabric without messing up it.

Once the vinyl remains employed, you can now cut out and also stitch it as being the standard fabric. Customize your  project to your own choice of color and pattern to make it more personal. Voila! You now have your very own water resistant fabric.



TedsWoodworking Plans and Projects